Battery Sample Strategy: Verify Supplier Quality Efficiently
Sample Selection Strategy
Select 2-3 capacity tiers for comparative testing based on device requirements. For example, smart lock manufacturers should request AA 1.5V lithium battery 2775mWh and 3100mWh tiers simultaneously, test runtime in actual devices, and select the good cost-performance tier.
If devices have multiple models, recommend requesting samples for each model. Different devices have different power consumption characteristics, same battery may perform very differently in different devices.
Test Item Checklist
Basic tests: Capacity verification (actual vs rated capacity), voltage testing (open circuit and working voltage), internal resistance testing.
Performance tests: Cycle life test (charge-discharge cycles until capacity degrades to 80%), high/low temperature performance test (discharge at -20°C and 60°C), charging speed test.
Safety tests: Overcharge test, over-discharge test, short circuit test, crush test. Recommend commissioning third-party laboratory for objectivity.
JYOVEX Sample Policy
JYOVEX provides sample service, regular models can be applied directly, custom models need 3-5 day prototyping after requirement confirmation. Samples shipped with bulk orders are free of charge. Samples come with complete test reports including capacity, internal resistance, voltage data.
Need Battery Selection Advice?
Our technical team can provide professional battery selection solutions and OEM/ODM customization services based on your device requirements.
Related Articles
B2B Battery Procurement: Supplier Screening to Cooperation
This article details the complete process of B2B battery procurement from supplier screening to long-term cooperation.
Battery OEM/ODM Customization: Complete Service Guide
From logo customization, packaging design to solution selection and sample development, this article details the full OEM/ODM process.
Cross-border Battery Sales: Certification and Compliance
Cross-border e-commerce platforms have strict certification requirements for battery products. This article covers CE, UL, UN38.3, FCC requirements.
